 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Home | Search | Basket | My Account | Contact An Affiliate Website of: http://www.ccw-tools.com | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Categories |
Bighealey Affiliate Tool Shop |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Promotions | Wish List | SpeedOrder | Shipping | Mailing List | About | Site Map | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Draper 10579 - Expert Quality, adjustable tubing cutter for small bore tubing or in-situ applications where space is limited. Diecast aluminium body, hardened steel blade, two flare groove rollers and deburring reamer in adjusting knob. Display packed. * Sold loose
Draper 10580 - Expert Quality, adjustable tubing cutter with diecast body, hardened steel blade and two flare groove rollers. The adjusting knob also incorporates a retractable reamer and spare cutting wheel. Display packed. * Sold loose
Draper 10876 - Malleable cast iron wrench with accurately machined jaw faces. Designed for horizontal or vertical use in confined areas on back nuts fitted to taps and basins and other fittings. Display packed. 
Draper 11895 - Quality tester with plain slot blade, one piece moulded insulated blade sheath and transparent plastic handle for maximum safety. With pocket clip. Testing range 220-250V. Supplied with 13A safety gate tool which allows testing without removing socket from wall. Display packed. Tested and approved to GS Specification. 
Draper 11909 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Display packed. Manufactured to EN60454/Type2 Specifications. 
Draper 11910 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Ideal for replenishment stock for the Draper Insulation Tape Countertop Display Stock No. 12818. Stock No. 68157 comprises 2 x black, 1 x white/red/yellow/green/blue and yellow & green stripe. Security wrapped eight rolls per pack. Manufactured to EN60454/Type2 Specifications. 
Draper 11911 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Ideal for replenishment stock for the Draper Insulation Tape Countertop Display Stock No. 12818. Stock No. 68157 comprises 2 x black, 1 x white/red/yellow/green/blue and yellow & green stripe. Security wrapped eight rolls per pack. Manufactured to EN60454/Type2 Specifications. 
Draper 11912 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Ideal for replenishment stock for the Draper Insulation Tape Countertop Display Stock No. 12818. Stock No. 68157 comprises 2 x black, 1 x white/red/yellow/green/blue and yellow & green stripe. Security wrapped eight rolls per pack. Manufactured to EN60454/Type2 Specifications. 
Draper 11913 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Ideal for replenishment stock for the Draper Insulation Tape Countertop Display Stock No. 12818. Stock No. 68157 comprises 2 x black, 1 x white/red/yellow/green/blue and yellow & green stripe. Security wrapped eight rolls per pack. Manufactured to EN60454/Type2 Specifications. 
Draper 11914 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Ideal for replenishment stock for the Draper Insulation Tape Countertop Display Stock No. 12818. Stock No. 68157 comprises 2 x black, 1 x white/red/yellow/green/blue and yellow & green stripe. Security wrapped eight rolls per pack. Manufactured to EN60454/Type2 Specifications. 
Draper 11915 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Ideal for replenishment stock for the Draper Insulation Tape Countertop Display Stock No. 12818. Stock No. 68157 comprises 2 x black, 1 x white/red/yellow/green/blue and yellow & green stripe. Security wrapped eight rolls per pack. Manufactured to EN60454/Type2 Specifications. 
Draper 11982 - Expert Quality, PVC self-extinguishing flame resistant tape manufactured under strict quality control. Display packed. Manufactured to EN60454/Type2 Specifications. 
Draper 12701 - For reseating most taps available on the U.K. market. The four plastic threaded guides are designed to fit taps to BS1010 with 18 tpi threads and BS 5412 with BSP threads. Tool is supplied with three zinc plated hardened steel cutters which will repair most popular 12mm (1/2") and 19mm (3/4") taps. Display packed. Cutter sizes:17mm (11/16") dia. suitable for some 12mm (1/2") taps.19mm (3/4") dia. suitable for some 12mm (1/2") taps.25mm (1") dia. suitable for some 19mm (3/4") taps. *Sold loose.
Draper 12818 - Supplied complete with rolls of Expert Quality PVC self-extinguishing flame-resistant insulation tape. Eight rolls of each colour. Manufactured to EN60454/Type2 Specifications. 
Draper 13693 - For the installation or removal of electric immersion heaters fitted on domestic hot water cylinders with moulded insulation. Manufactured from 3mm thick steel and zinc plated with offset handle. Display packed. 
Draper 13694 - Expert Quality, box wrench with tommy bar. For the installation or removal of electric immersion heaters fitted on domestic hot water cylinders with moulded insulation. Sold loose. 
Draper 13743 - Detect electricity cables, metal pipes and metal studs. The LED on the detector will stay lit together with a continuous audible sound when metal is detected; when electricity is found the LED will flash with an intermittent sound. Size 150 x 80mm. Powered by a PP3 size battery (sold separately). A detailed instruction leaflet is inclosed with each tool. Display packed. 
Draper 17184 - A traditional pattern wrench forged from chrome vanadium steel hardened and tempered. The top jaw has been sand blasted and lacquered for corrosion protection and have faces serrated in opposite directions to ensure a secure grip. Display packed. 
Draper 17192 - A traditional pattern wrench forged from chrome vanadium steel hardened and tempered. The top jaw has been sand blasted and lacquered for corrosion protection and have faces serrated in opposite directions to ensure a secure grip. Display packed. 
Draper 17209 - A traditional pattern wrench forged from chrome vanadium steel hardened and tempered. The top jaw has been sand blasted and lacquered for corrosion protection and have faces serrated in opposite directions to ensure a secure grip. Display packed. 
Draper 17217 - A traditional pattern wrench forged from chrome vanadium steel hardened and tempered. The top jaw has been sand blasted and lacquered for corrosion protection and have faces serrated in opposite directions to ensure a secure grip. Display packed. 
Draper 17225 - A traditional pattern wrench forged from chrome vanadium steel hardened and tempered. The top jaw has been sand blasted and lacquered for corrosion protection and have faces serrated in opposite directions to ensure a secure grip. Display packed. 
Draper 19207 - Expert Quality, designed for use on decorative or bright plated fittings that can be easily damaged using conventional steel jaws. The jaws are adjustable for securing a variety of shapes to a maximum of 40mm with eight variable positions. Manufactured from chrome vanadium steel hardened, tempered and chemically blacked. Cushion-grip handles. Supplied complete with replacement set of soft jaws. Display packed. 
Draper 19225 - Expert Quality, grade K60/40 tin/lead. Supplied in tubes and reels. Display packed. Manufactured to BS 219K Specification. Not for use in potable water systems 
Draper 19226 - Expert Quality, grade K60/40 tin/lead. Supplied in tubes and reels. Display packed. Manufactured to BS 219K Specification. Not for use in potable water systems 
Draper 19227 - Expert Quality, grade K60/40 tin/lead. Supplied in tubes and reels. Display packed. Manufactured to BS 219K Specification. Not for use in potable water systems 
Draper 21561 - For reseating most taps available on the U.K. market. The four plastic threaded guides are designed to fit taps to BS1010 with 18 tpi threads and BS 5412 with BSP threads. Tool is supplied with three zinc plated hardened steel cutters which will repair most popular 12mm (1/2") and 19mm (3/4") taps. Display packed. Cutter sizes:17mm (11/16") dia. suitable for some 12mm (1/2") taps.19mm (3/4") dia. suitable for some 12mm (1/2") taps.25mm (1") dia. suitable for some 19mm (3/4") taps. *Sold loose.
Draper 21562 - For reseating most taps available on the U.K. market. The four plastic threaded guides are designed to fit taps to BS1010 with 18 tpi threads and BS 5412 with BSP threads. Tool is supplied with three zinc plated hardened steel cutters which will repair most popular 12mm (1/2") and 19mm (3/4") taps. Display packed. Cutter sizes:17mm (11/16") dia. suitable for some 12mm (1/2") taps.19mm (3/4") dia. suitable for some 12mm (1/2") taps.25mm (1") dia. suitable for some 19mm (3/4") taps. *Sold loose.
Draper 21564 - For reseating most taps available on the U.K. market. The four plastic threaded guides are designed to fit taps to BS1010 with 18 tpi threads and BS 5412 with BSP threads. Tool is supplied with three zinc plated hardened steel cutters which will repair most popular 12mm (1/2") and 19mm (3/4") taps. Display packed. Cutter sizes:17mm (11/16") dia. suitable for some 12mm (1/2") taps.19mm (3/4") dia. suitable for some 12mm (1/2") taps.25mm (1") dia. suitable for some 19mm (3/4") taps. *Sold loose.
Draper 21837 - Designed to clear blocked drains by an injection of water at high pressure to dislodge the blockage. Supplied complete with 70mm diameter cup suitable for sinks and baths. A 150mm diameter cup for cleaning toilets and urinals is available (Stock No.21838). To use - the Drain Blaster is filled with water, placed over the plughole and water blasted into drain using the plunger. Suitable for recessed wastes only. Display packed. 
Draper 21838 - Designed to clear blocked drains by an injection of water at high pressure to dislodge the blockage. Supplied complete with 70mm diameter cup suitable for sinks and baths. A 150mm diameter cup for cleaning toilets and urinals is available (Stock No.21838). Multiples of 12 only, supplied in countertop display. 
Draper 22171 - Fully flexible plated spring steel probe with turning handle. Display packed. 
Draper 22190 - Designed for drawing electrical wiring through conduits, etc. Manufactured from spring steel coil, with a brassed knob on the lead end to avoid snagging and a 10mm diameter ring for attaching cable to the following end. Display packed. 
Draper 22286 - For use on copper pipe. Rollers manufactured from case hardened steel with former from steel. Handles tubular steel with PVC grips, overall length 510mm. Anodized aluminium guide. Display carton. 
Draper 23540 - Comprising ten rods each 915mm long, double worm screw and plunger. 9M long when fully assembled. Manufactured from polypropylene with brass plated end connections. Display packed. 
Draper 23553 - For the removal of surplus molten solder during desoldering and soldering operations. The surplus molten solder is sucked into barrel of gun when plunger is pressed. Aluminium body. Display packed. 
Draper 23554 - A quality stand with heavy duty metal base. Features a reinforced spring safety holder to prevent flex tangling with spring. Supplied complete with cleaning sponge. Display carton. 
Draper 24866 - Square opening keys for use on domestic radiator bleed screws. Manufactured from zinc alloy. Packed two per display card or two per display box. 
Draper 26418 - Compact tool which can be used as an automatic or conventional cutter to produce clean square cuts on copper or thicker gauge plastic pipes. The cutter will automatically adjust the tension during the cutting process. Manufactured from ABS for long service life. Display packed. * Sold loose
Draper 26420 - Malleable cast square suitable for 1/2" and 3/4" square heads. ‘U‘ shaped crutch suitable for 1/2" and 3/4" tee handled stop cocks. Manufactured from zinc plated mild steel. Display packed. 
Draper 26933 - Expert Quality, adjustable tubing cutter with diecast body, hardened steel blade and two flare groove rollers. The adjusting knob also incorporates a retractable reamer and spare cutting wheel. Display packed. * Sold loose
Draper 30309 - Protects working areas from flame damage and scorching when soldering or using gas torches. Size 250 x 250mm. Display packed. Guaranteed asbestos free. 
Draper 30493 - Quality tester with plain slot blade, one piece moulded insulated blade sheath and transparent plastic handle for maximum safety. Without pocket clip. Testing range 220-250V. Supplied with 13A safety gate tool which allows testing without removing socket from wall. Display packed. Tested and approved to GS Specification. 
Draper 30753 - For use on copper pipe. Rollers manufactured from case hardened steel with former from steel. Handles tubular steel with PVC grips, overall length 510mm. Anodized aluminium guide. Display carton. 
Draper 31706 - Compact tool which can be used as an automatic or conventional cutter to produce clean square cuts on copper or thicker gauge plastic pipes. The cutter will automatically adjust the tension during the cutting process. Manufactured from ABS for long service life. Display packed. * Sold loose
Draper 31985 - Expert Quality, heavy duty trigger operated cutter for cutting plastic pipes (6-35mm O/D) and mouldings. The ratchet blade action reduces distortion to a minimum. The cutter‘s body is manufactured from diecast aluminium and fitted with a heat treated replaceable stainless steel blade. Display packed. *Sold loose.
Draper 31987 - Expert Quality, heavy duty trigger operated cutter for cutting plastic pipes (6-35mm O/D) and mouldings. The ratchet blade action reduces distortion to a minimum. The cutter‘s body is manufactured from diecast aluminium and fitted with a heat treated replaceable stainless steel blade. Display packed. *Sold loose.
Draper 32894 - Beech handle 22mm diameter with rubber plunger. Sold loose. 
Draper 33082 - Designed to clear blocked drains by an injection of water at high pressure to dislodge the blockage. Supplied complete with 70mm diameter cup suitable for sinks and baths. A 150mm diameter cup for cleaning toilets and urinals is available (Stock No.21838). Multiples of 12 only, supplied in countertop display. 
Draper 36329 - Expert Quality, adjustable tubing cutter with diecast body, hardened steel blade and two flare groove rollers. The body incorporates a retractable reamer with spare cutting wheel in adjusting knob. Display packed. *Sold loose.
Draper 37317 - Handy pocket analogue multimeter for use in electrical and automotive applications. A crocodile clip probe set is available - see entry below. Display packed. Features:- Measures AC and DC Voltage- Measures DC current- Measures resistance- 16 position rotary function and range selector- Recessed input terminals- Test probes and lead included - Battery check facility Specification:DC voltage ... 2.5, 10, 50, 250, 500V (acc. ±5% of full scale)AC voltage ... 10, 50, 250, 500V (acc. ±5% of full scale)DC current ... 500uA, 10mA, 250mA (acc. ±5% of full scale)Resistance - ohms ... x10, x1K (acc. ±5%)Size ... 64 x 100 x 35mmBattery ... 1 x AA (not supplied) IEC61010 Specification *Sold loose.
Draper 37470 - Handy pocket analogue multimeter for use in electrical and automotive applications. A crocodile clip probe set is available - see entry below. Display packed. Features:- Measures AC and DC Voltage- Measures DC current- Measures resistance- 16 position rotary function and range selector- Recessed input terminals- Test probes and lead included - Battery check facility Specification:DC voltage ... 2.5, 10, 50, 250, 500V (acc. ±5% of full scale)AC voltage ... 10, 50, 250, 500V (acc. ±5% of full scale)DC current ... 500uA, 10mA, 250mA (acc. ±5% of full scale)Resistance - ohms ... x10, x1K (acc. ±5%)Size ... 64 x 100 x 35mmBattery ... 1 x AA (not supplied) IEC61010 Specification *Sold loose.
Draper 37873 - Uses LEDs to indicate voltage. Suitable for testing domestic wiring, automobile circuitry and electronic equipment, etc. 1.2M of VDE harmonized lead. Supplied with 13A safety gate tool which allows testing without removing socket from wall. Range: 4.5 - 400V DC120V - 400V AC (0-60Hz). Display packed. 
Draper 38907 - Expert Quality, designed for use on decorative or bright plated fittings that can be easily damaged using conventional steel jaws. The jaws are adjustable for securing a variety of shapes to a maximum of 40mm with eight variable positions. Manufactured from chrome vanadium steel hardened, tempered and chemically blacked. Cushion-grip handles. Supplied complete with replacement set of soft jaws. Display packed. 
Draper 50584 - For use on copper pipe. Rollers manufactured from carbon steel with former from cast aluminium. Handles tubular steel with PVC grips, overall length 640mm. Anodized aluminium guides. Display carton. 
Draper 51346 - Handy pocket analogue multimeter for use in electrical and automotive applications. A crocodile clip probe set is available - see entry below. Display packed. Features:- Measures AC and DC Voltage- Measures DC current- Measures resistance- 16 position rotary function and range selector- Recessed input terminals- Test probes and lead included - Battery check facility Specification:DC voltage ... 2.5, 10, 50, 250, 500V (acc. ±5% of full scale)AC voltage ... 10, 50, 250, 500V (acc. ±5% of full scale)DC current ... 500uA, 10mA, 250mA (acc. ±5% of full scale)Resistance - ohms ... x10, x1K (acc. ±5%)Size ... 64 x 100 x 35mmBattery ... 1 x AA (not supplied) IEC61010 Specification *Sold loose.
Draper 51348 - Expert Quality, specification shown in ‘Digital Multimeters‘ Table or the meter‘s instruction manual. Display carton. *Sold loose.
Draper 52058 - Hand-held instrument for detecting rising and penetrating damp in foundation walls, floors and timbers. Audible signals detects the presence of damp and humidity. Size 120 x 60mm. Uses a PP3 battery (sold separately). Display packed. 
Draper 52320 - 
Draper 53096 - Suitable for threading black gas or galvanized iron pipes. Kit comprises four dieheads, two-piece tubular steel handle and compact ratchet head. The compact ratchet head is suitable for working close to walls etc. Cast iron dieheads with alloy steel dies, four chasers per head for a clean accurate thread and four waste holes for quick dispersion of swarf. Packed in blow mould carrying case and display sleeve. Contents: 1/2, 3/4", 1" and 1.1/4" BSP dieheads "
Draper 53206 - For use on copper pipe. Rollers manufactured from carbon steel with former from cast aluminium. Handles tubular steel with PVC grips, overall length 640mm. Anodized aluminium guides. Display carton. 
Draper 53207 - For use on copper pipe. Rollers manufactured from carbon steel with former from cast aluminium. Handles tubular steel with PVC grips, overall length 640mm. Anodized aluminium guides. Display carton. 
Draper 53548 - Specification shown in ‘Digital Multimeters‘ Table. Display packed. * Sold loose.
Draper 53549 - Specification shown in ‘Digital Multimeters‘ Table. Display packed. * Sold loose.